Lift Box Lash Lift Kit InstructionsUpdated 4 months ago

Lift Box Lash Lift Kit

DO NOT apply this technique to damaged or broken lashes or brows. 

Step 1: 

Complete the client consultation form with your client to determine eligibility. Then, position your client comfortably on the treatment bed.

Step 2: 

Wash your hands and sanitize them. Prepare your station.

Step 3: 

Thoroughly cleanse the lashes and remove any makeup or residue from them.

Step 4: 

Using a clean spoolie, comb through the lashes to ensure they are dry and untangled.

Step 5: 

Cover all of the lower lashes by applying foam tape or gel pads under the eyes.

Step 6:

Using a Micro Swab, apply a small amount of Lift Box Lash Primer on natural lashes from the base to the tip.

Step 7:

Select the appropriate size of silicone pad according to your client's desired amount of lash lift. If necessary, you can trim the pad to fit. Apply a small amount of Lift Box Lash & Brow Glue to the bottom of the pad and place it as close to the root of the lashes as possible, ensuring it sticks well to the skin.

Step 8:

Once the silicone pad is firmly attached to the eyelids, apply Lift Box Lash & Brow Glue to the surface of the pad, working in sections from the outer to the inner corners. Wait a few moments for each section to become tacky, then use a small wooden stick or an eyelash comb to align each eyelash onto the silicone pad. Pull the eyelashes up and over the pad evenly and tightly. If needed, apply more glue and repeat until all the lashes are perfectly attached to the pads.

Step 9:

To apply perm lotion, take a portion from packet #1 and put it on a disposable palette. Then, use a microswab to apply the lotion evenly across the lash line's bottom half, leaving the tips of the lashes lotion-free. Depending on the length and thickness of the lashes, the processing time will vary between 10 to 15 minutes. For thin eyelashes, the processing time is 10 minutes, and for thick lashes, it is 15 minutes. Once the processing time is over, carefully remove the perm lotion from the lashes with a clean micro swab. Ensure the lashes stay adhered to the silicone pad. Do not use water. 

Step 10: 

To apply setting lotion, take a portion from packet #2 and put it on a disposable palette. Then, use a microswab to apply the lotion evenly across the lash line's bottom half, leaving the tips of the lashes lotion-free. Depending on the length and thickness of the lashes, the processing time will vary between 10 to 15 minutes. For thin eyelashes, the processing time is 10 minutes, and for thick lashes, it is 15 minutes. Once the processing time is over, carefully remove the perm lotion from the lashes with a clean micro swab before applying the Lash Lift & Brow Serum. Do not use water.

Step 11:

Apply a small amount of Lift Box Lash & Brow Serum onto the disposable palette. Using the micro-swabs, apply Lift Serum onto eyelashes in a thin, even layer and allow to moisturize for 5 mins.

Step 12: 

To remove the glue from the eyelashes, apply a small amount of water to Micro Swabs or cotton swabs. You should slightly saturate the lashes with water along the lash line, always moving the swab upward to keep the lashes lifted. This process will make the glue soften and start to dissolve. You should repeat this process until all glue is removed and the lashes are released from the silicone pad. Additionally, you may use another water-saturated swab to remove the silicone pad from the eyelid.